89
Main Menu - Search Channels
Automatic Channel Search
After calling up the menu you will see the
following on-screen display:
The
buttons allow you to select
different sets of parameters for the search.
Satellite
Now use the
buttons to choose between the individual satellites you have set up, or select
the setting “All”. If “All” is selected, all the individual satellites you have set up will be searched for
new channels. Make sure your reception system is aligned to this/these satellite(s).
Channel Search Mode
Use the
buttons to select the type of channels you want to search for. You have three options:
- “free & scrambled”
All channels are searched for
- “only free”
Only free-to-air channels are searched for
- “only scrambled”
Only encrypted channels are searched for
To view encrypted channels you need an appropriate CA (Conditional Access) module and
a valid smart card together with a valid subscription to the relevant Pay TV provider.
Network Search
Use the
buttons (On/Off) to select whether a network search should be performed. If you set
the network search to “Off”, only the factory stored transponders of the satellite(s) you previously
selected will be searched for new as yet unlisted channels. If you set the network search to “On”, the
transponder network enables additional transponders that have not yet been stored to be located. They
are then stored and scanned for new channels in the same way as the existing transponders. Once you
have de
fi
ned all the settings, use the
buttons to switch to the “Start Search” selection
fi
eld
and con
fi
rm the start of the search using the
button.
