Initial settings
25
Initial settings
The “Installation“ menu entry in the main menu is used for initial setting of the
satellite receiver and for matching it to the satellite system.
The receiver has already been factory preprogrammed for standard satellite
receiving systems with a universal LNB. Thus changes are required only if the
receiving system deviates from this type of system.
Changes in the basic setting of the receiver are generally carried out by the
installer when the satellite receiving system is installed. We recommend that the
installer notes down the altered basic setting on page 45 in this operating manual.
In addition to this, you can:
-
alter the order of the bouquets
-
alter the order of TV and radio programmes
-
execute an automatic search run on a new digital broadcasting station
-
install a new digital transponder
-
activate or deactivate parental lock
-
alter antenna settings, TV type and time
-
load new system software
-
programme the timer
-
carry out an application check
-
stipulate the language for the screen displays
-
stipulate common interface settings
Calling up the “Installation” menu
The following steps need to be carried out to call up the menu:
•
Press
the
key on the remote control.
•
Select the “Installation“ menu entry in the main menu using the
key and
confirm the selection with
.
The “Installation“ menu is displayed on the screen
