Kathrein UFD 170 Operating Manual Download

Page: 68 / 80

Reset/Park

Use the



keys to go to the “Reset/Park” option, and

change the selection to “Reset” using the



keys to go to the “Reset/Park” option, and

keys. Now press



The following screen appears:

The antenna is reset, and automatically moves to the park position. A
short message “Antenna reset” appears again. Press



to exit the

menu.

Note:

Before replacing individual components of the system (e,g, recei-

ver), the turntable should be moved to park position with “Re

““ set”.

After the “Reset

““

”, all satellite positions previously saved

””

in the

UFD 170 control unit are deleted. However, the satellite data

in the receiver component of the UFD 170 is retained.

in the receiver

Press



in the main menu, and then use the



keys to switch to the “HDP antenna setup” option. Then press



to go to the HDP menu.

Reset

Summary of Contents for UFD 170

















































































Search results

Summary of Contents for UFD 170

Reviews:

Related manuals for UFD 170

Brands by name

Popular brands

Kathrein UFD 170, Operating Manual

Search results

Summary of Contents for UFD 170

Reviews:

Related manuals for UFD 170

Brands by name

Popular brands