16
Before you start to use the UFC 965, read the sections "Safety Instructions
- "Important Notes" and "Connection and Set-Up" through to the item "First
installation".
Do not connect the unit to the mains until all installation work has been properly
carried out.
The guidance provided in the "First installation" section assumes that the receiver has been
properly connected as per the "Safety Instructions - Important Notes" and "Connection and
Set-Up" chapters through to the "First installation" section.
Required buttons on remote control for fi rst installation:
...
Number input
(blue)
Proceed to the next step in the
fi rst installation
(red)
Go back one step in the
fi rst installation
Confi rm the changed
values/setting;
call up the submenus
Select/change individual
menu parameters, navigation
Cancel entry, go back
First switch your TV set on and select the AV-/HDMI input you have used to connect the receiver to your
TV set. Switch on the receiver at the power switch on the rear of the unit. Now perform the fi rst installation.
If you have any questions or encounter problems, contact your specialist dealer.
The following on-screen display appears:
Always check the bar at the bottom of
the on-screen display. This provides
information on what to do next.
Use the
buttons to select the desired menu language and confi rm your selection using the
button. The following languages are available: English, German, Turkish, Russian, French, Arabic,
Italian, Portuguese, Spanish, Polish, Czech, Swedish, Norwegian, Finnish, Greek, Serbian, Hungarian,
Croatian, Danish, Dutch and Albanian.
First installation
Connection and Set-Up
Tip!
