3 / 9
Wall mounting
• For wall mounting only use the sup-
For wall mounting only use the sup-
plied bracket (screws are not in-
cluded in the delivery scope)
Mount wall support with two screws
(Ø 4 mm, head diameter > 7 mm)
• Screw on/attach all cables
• Insert the device from above with feet
pointing down into the wall support
• Table mounting (no fastening required)
A
B
(Note on mounting position A: to prevent the
device from being pushed out of the sup-
port, the device should be held during sub-
sequent cable installation work)
Summary of Contents for SAT IP 414/E
Page 19: ......
