17
INSTALLATION AND CONNECTION
BRIEF INSTRUCTIONS FOR INSTALLING THE TURNTABLE
The sequence of pictures shown illustrates all the necessary installation steps
that are required to install the turntable and the BAS 60 planar antenna on the
roof of the vehicle.
The other detailed instructions in this installation and operating manual must also be followed!
For ease of illustration, we have dismounted the BAS 60 on these photographs. As supplied, the BAS 60
is pre-assembled to the turntable.
Apply Sikafl ex® 291 adhesive to the
roof gland. Insert the spigot into the
hole and secure it from below with
the knurled nut.
Unscrew screws (6 x, 10 AF) from
the mounting plate and remove the
mounting plate.
Place the turntable on prepared
wooden supports to protect the roof
of the vehicle.
Determination of installation
location.
Important! System has a turning
range of 96 cm (Ø). Drill hole with
Ø 38 mm. Deburr sharp edges of
hole.
