6 / 10
NOTICE
Multi-switches without Kathrein Power Saving do not give signalling to the
end multi-switch. For permanent powering of the LNB, the rotary switch
must be turned to the left side.
NOTICE
Changes in the confi guration during operation can lead to undesirable
confi gurations and malfunction.
►
Do not alter the confi guration during operation.
Multi-Switch Modes
There are two diff erent modes that you can
set:
●
A
: 8 (
EXR
): 8 user bands per output are
available In this mode, the multi-switch
uses the same frequencies as the
EXR
single-cable multi-switch series (fi rst
generation).
●
B
: 12 (
EXE
): 12 user bands per output are
available. In this mode, the multi-switch
uses the same frequencies as the Kath-
rein EXE single-cable multi-switch series
(second generation).
Satellite positions
:
1...4 SAT
: The possible positions are presented by means of numbers on the multi-
switch:
●
When operated with Universal LNB(s), 2 satellite positions are possible.
●
When operated with wideband LNB(s), up to 4 satellite positions are possible.
With
one
EXD 1524/2524 it is possible:
●
to receive one satellite in the universal mode.
●
to receive two satellites in the wideband mode.
With
two
EXD 1524/2524 it is possible:
●
to receive two satellites in the universal mode,
●
to receive four satellites in the wideband mode.
To do so, it is necessary to connect the outputs of the two EXD 1524/2542 to a splitter
(EBC 110).
