Installation Menu
26
System Information
Display of the receiver's hardware and software versions.
Factory Reset
This menu is protected by the default password "0000". If you have
changed the receiver's programming and want to reset it to its original
setup when shipped, select this line. Press the
OK
button and key in
the password. After about a minute the memory will be updated. Turn
the receiver off and back on again at its power switch. The same
display appears as during first installation.
Important:
The receiver is reset to its factory configuration. Any changes you may
have made are lost.
Summary of Contents for Euroline UFE 370/S
