9 of 16
7.1 LED Status Display in Conjunction with CAP Systems
Function LED
Colour
Signal
Description
Problem
Red
LED flashes 1 x for 0.5 s, then pauses for 2 s
No connection to HDP
LED flashes 2 x for 0.5 s, then pauses for 2 s
Satellite not found
LED flashes 3 x for 0.5 s, then pauses for 2 s
Ignition is active
LED flashes 4 x for 0.5 s, then pauses for 2 s
Turntable is blocked
LED flashes 5 x for 0.5 s, then pauses for 2 s
Battery voltage too low
LED flashes 6 x for 0.5 s, then pauses for 2 s
Temperature warning
LED flashes 7 x for 0.5 s, then pauses for 2 s
Transponder does not exist
To return the CAP Converter to normal operation:
1. Check the cause of error.
2. Press the pushbutton once to acknowledge the error so that the CAP Converter can
return to normal operation.
Normal
operation
Green
LED flashes slowly
Turntable is in the park position
LED flashes 3 x, followed by a short pause
Turntable is moving, e.g. to the
park position
LED flashes quickly
Turntable is searching for a
satellite position
LED is permanently on
Satellite found
Red
LED is permanently on
Standby
USB
update
Yellow
1)
LED is permanently on
Downloading data from USB
Green
LED lights up green for 1 s
Data download successful
Red
LED lights up red for 1 s
Data download failed
Yellow
1)
LED lights up yellow for 1 s
Data download complete
Boot-
loader
Yellow
1)
LED is permanently on
Bootloader is active
Red
LED flashes 1 x for 0.5 s, then pauses for 1.5 s
Data carrier not found
LED flashes 2 x for 0.5 s, then pauses for 1.5 s
Folder structure/update file not
found
LED flashes 3 x for 0.5 s, then pauses for 1.5 s
Invalid update file
LED flashes 4 x for 0.5 s, then pauses for 1.5 s
Saving update file failed
1)
The red and the green LEDs on the external pushbutton are on at the same time
