5 of 48
2
Scope of Delivery
①
Parabolic reflector 60 cm
②
Twin LNB
③
Turntable with integral controls
④
CAP converter
The MobiSet 3 CAP 750 GPS consists of:
●
Turntable
③
complete with control electronics, pre-assembled parabolic reflector
①
and twin LNB
②
●
Mounting plate
●
Complete cabling set:
1 x master coaxial cable
1)
, 3 m, marked in red, for the master connection to the CAP converter V2
2)
1 x slave coaxial cable
1)
, 3 m, for connection to a second receiver or TV with an integrated receiver
1 x power supply cable
1)
, 3 m
1 x coaxial extension cable, 5 m, F-type female connector to F-type male connector
1 x power supply extension cable, 7 m for connection to the on-board power supply
1 x blade-type fuse and fuse holder
●
Roof duct with sealing gasket
●
CAP converter V2
④
with a 12 V connection cable and LED/pushbutton cable
3)
●
4 x wood screw, 4.5 mm x 30 mm
●
CAP 750 GPS, CTS 750-xx GPS operating manual
1)
Fixed connection to the turntable
2)
A coaxial cable
F-socket/F-socket
is required to connect the TV set to the CAP converter (cable length depends on the distance
between the two devices). This cable is
not
included. For this, see
12.1 Installing the CAP Converter, p.41
.
3)
only with CAP 750 GPS
①
②
③
④
