12
en | Installation
LE80 Radio Receiver
LE80_UM_EN_V1.1_2021.12
User Manual
TeleAlarm
3.3
Connecting the power supply
There are two different ways to connect the power supply of
the LE80 Radio Receiver. After connection, the LE80 Radio
Receiver will be in standby mode.
3.3.1
Power supply with the RJ12 power socket
The LE80 Radio Receiver can be powered by an optional
obtainable power supply unit (PSU). The PSU should be
plugged into the RJ12 socket in the installation compartment
and should be easily accessible at any time. See
Section 4.1 Connecting ports, page 13 for access to the socket.
See
Section 8 Technical data, page 29 for information about
the power supply.
3.3.2
Power supply connected to a wired installation
The LE80 Radio Receiver can be powered by an external
power supply connected to the pins cC1 and C2 of the
connection board. See
Section 4.1 Connecting ports, page 13
for information about the power supply.