KATEK TeleAlarm LE80, User Manual, Page: 13 / 32

LE80 Radio Receiver Connection compartment | en 13
TeleAlarm User Manual LE80_UM_EN_V1.1_2021.12
4 Connection compartment
4.1 Connecting ports
To open the device:
–
hold the LE80 Radio Receiver in one hand, facing you,
so that you can see the TeleAlarm logo and the two
LEDs.
– pull the connection compartment housing (on the
bottom side) downwards.
– you can now see the connectors as in the following
illustration:
Figure 4.1 LE80 Radio Receiver connection compartment
4.2 Connectors pinout
Modes 1 to 9 can only be programmed in using the PR80
device, see
Section 5 Programming, Page 15
NOTICE!
The standby conditions of Relay 1 and Relay 2 are listed in
the table below.