Katanax X-FLUXER, Manual

Page: 22 / 86

20
The Copy button is useful to duplicate
an existing program, to create a
derived recipe. More details are given
at page37, Managing fusion methods .
The Delete button is used to erase a
program from memory. More details
are given at page 37, Managing fusion
methods .
The Save button is used to write the
current program and its parameters
into memory. More details are given at
page 37, Managing fusion methods.
The Global Parameters button is used
to access a screen where general
configuration settings can be modified.
More details are given at page 43,
Global parameters .
The padlock icon/button shows the
state of the fusion recipe parameters.
A closed padlock means that the
parameters are locked, and a
password is required to unlock
parameter access. Conversely, an
open padlock means that all
parameters can now be freely
changed.
More details are given at page 32,
Programming the X-300 (advanced) .
Entering the password is also required
to modify the parameters of the Global
parameters screen.
Loading a
program
Changing the current program can be done in several ways.
 Touching the program number will call the program selection screen.
 Touching the left or right arrows on either side of the program name will also
call the program selection screen, but will also decrease/increase the program
number.
 In the program selection screen, you can use the left or right arrows to scroll
among the proposed programs, or you can directly select the desired program
by touching its name.