2Ah & 4Ah BATTERY INSTRUCTION MANUAL
HOW TO INSERT BATTERY ON CHARGER
SAFETY & MAINTENANCE
1. ALIGN BATTERY RIBS WITH CHARGER
2. SLIDE INTO CHARGER
3. STOP WHEN YOU HEAR IT CLICK IN PLACE
TO REMOVE BATTERY:
Press & hold release button (1) on battery & follow steps in reverse.
LI-ION
Ah
18V CHARGE-ALL
18V CHARGE-ALL
LI-ION
Ah
18V CHARGE-ALL
18V CHARGE-ALL
LI-ION
Ah
18V CHARGE-ALL
18V CHARGE-ALL
1
2
3
*CLICK*
Australia & Global
www.katanapowertools.com.au
Made to Katana
specifications and
quality standards in
China.
NOT INTENDED
FOR TRADE USE
Warranty on this Katana product is given by Kincrome Australia Pty Ltd of 3 Lakeview Drive, Caribbean Park, Scoresby, Victoria, Australia
(Tel +61 3 9730 7100) If this product has materials or workmanship defects (other than defects caused by abnormal or non warranted use)
you can, at your cost, send the product to place of purchase, an authorised Kincrome service agent or one of Kincromes addresses for
repair or replacement. Your rights under this warranty are in addition to any other rights you have under the Australian Consumer Law or
other applicable laws. Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to
a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled
to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. For
further details please visit www.kincrome.com.au or call us. Due to minor changes in design or manufacture, the product you purchase may
sometimes differ from the one shown on the packaging.
SAFETY
A safety feature of the Katana 18V Li-Ion battery system
is that if the Battery Pack is too hot to be charged, the
Battery Charger will NOT start charging and the light
will remain Green. When the Battery Pack has cooled,
the Charger will start charging. This may take up to 45
minutes.
MAINTENANCE
The batteries have been designed to provide trouble-free
life. However, like all batteries, they will eventually wear
out. DO NOT disassemble battery pack and attempt to
replace the cells. Handling of these batteries, especially
when wearing rings and jewellery, could result in serious
burns or electric shock.
To obtain the longest possible battery life, remove the
battery pack from the charger once it is fully charged and
ready for use.
STORAGE
Store the battery pack where the temperature is below
27°C.
Short term storage (weekly or monthly use)
Fully
charge the battery pack and remove from charger. Store in
a safe environment below 27°C
Long term storage (6 Months)
Battery packs should have a charge state of 2 indicator
lights. It is recommended that battery packs are
discharged to one indicator light (by running in a tool)
and charged back up to 2 indicator lights to prevent over
discharge (from self discharge).
To charge the battery pack after a six months storage
period, it is recommended to discharge the battery about
10%-20% (by running it in a tool) and charge afterwards to
maximize the battery lifetime.
220350
(2Ah)
/ 220370
(4Ah)
WARNING
THE FOLLOWING ACTIONS WILL RESULT IN THE WARRANTY BEING VOID.
• IF THE TOOL HAS BEEN OPERATED ON A SUPPLY VOLTAGE OTHER THAN THAT SPECIFIED ON THE TOOL.
• IF THE TOOL SHOWS SIGNS OF DAMAGE OR DEFECTS CAUSED BY OR RESULTING FROM ABUSE, ACCIDENTS OR ALTERATIONS.
• FAILURE TO PERFORM MAINTENANCE AS SET OUT WITHIN THE INSTRUCTION MANUAL.
• IF THE TOOL IS DISASSEMBLED OR TAMPERED WITH IN ANY WAY
