background image

MAINTENANCE

CORDLESS 1/3 sheet sander INSTRUCTION MANUAL

This power tool normally requires no maintenance; from time to time the ventilation slots on the motor 

casing should be cleaned out. If the unit should become defective, repair should be performed by an 

authorized service agent for electric tools. 

Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to damage from various 

types of commercial solvents and may be damaged by their use. Use clean cloths to remove dirt, dust, 

oil, grease, etc.

Warning! 

Do not at any time let brake fluids, gasoline, petroleum based products, penetrating oils, etc., come in contact with 
plastic parts. Chemicals can damage, weaken or destroy plastic which may result in serious personal injury.

220142

Australia & Global

www.katanapowertools.com.au

[email protected]

+61 3 9730 7100

Made to Katana 

specifications and 

 quality  standards 

in China. 

NOT INTENDED 

FOR TRADE USE

* All Katana power tools come with a 5 year (3+2 year) replacement warranty from date of purchase.

3 year standard warranty with the option to register your product online at www.katanapowertools.com.au/

register to receive an additional 2 years free of charge.

Products must be registered within 30 days from date of purchase to qualify for warranty extension. 

Katana products and services come with guarantees that cannot be excluded under the Australian Consumer 

Law. For major failures with the service, you are entitled: -to cancel your service contract with us; and -to a refund for the unused portion, 

or to compensation for its reduced value. You are also entitled to choose a refund or replacement for major failures with goods. If a failure 

with the goods or a service does not amount to a major failure, you are entitled to have the failure rectified in a reasonable time. If this is not 

done you are entitled to a refund for the goods and to cancel the contract for the service and obtain a refund of any unused portion. You 

are also entitled to be compensated for any other reasonably foreseeable loss or damage from a failure in the goods or service’. Warranty is 

given by  Kincrome Australia Pty Ltd of 3 Lakeview Drive, Caribbean Park, Scoresby, Victoria (Tel 1300 657 528) . 

KATANA Warranty is in addition to any other rights you have under the Australian Consumer Law or other applicable laws. For further details 

and terms please check our product guide, visit www.kanatapowertool.com.au or call us. Every effort is made to ensure advertised stock is 

available, but due to factors beyond the control of Kincrome Australia Pty. Ltd, not all products advertised in this catalogue may be available 

at all stores. Kincrome Australia Pty. Ltd. reserves the right to correct printing errors. All sizes shown are approximate only. Accessories 

shown do not come with the product unless otherwise specified. Due to printing process, colours in this catalogue may vary slightly to 

actual item. E. & O. E. © Copyright 2021. Reproduction in whole or in part is prohibited without consent. 

WARRANTY

*

5 YEAR

Summary of Contents for 220142









Reviews: