17.
Tighten the Nylock
nuts at the top of
the struts, if they
were loosened to
adjust the strut
length.
Now tighten the tri-
knobs which
connect the struts
to the spar and
hulls.
Finally tighten the
tri-knobs on the
mast base and
secure the safety
clip in one of the
small holes in the
tri-knob.
18.
Loosen the line which ties the quadrant bag to the front carry
handle on the starboard hull. Remove the front cable bracket,
cable end and steering quadrant from the quadrant bag.
19.
Fit the steering
quadrant, insert
the retaining pin
and R-clip and
replace the quick
release clamp.
Insert the steering
handle bar through
the mast base and
into the steering
quadrant. Tighten
the quick release
clamp on the
steering quadrant.
Adjust the tension
of the quick release
clamp and lock the
collar firmly around
the keel-end.
© Katalyst Marine Ltd.
15
