Here are the only tools you will need to
build this kit:
1.
Soldering Iron (25 – 40W)
2.
Multicore solder
3.
Cutters
4.
No. 1 Pozidriv screwdriver
5.
Large pair of pliers
We would suggest that you set up on a
large piece of cardboard or cutting board
along these lines.
So, Let’s start with the circuit board. It is
double-sided with plated tracks and solder
resist to stop solder going where it’s not
wanted. The top of the board has
component idents and orientation marks
to assist the build.
Always start a build with the smallest parts
first, which, in this case is the resistors.
There is a resistor colour-code chart at the
end of this set of instructions to help you
identify each one, so let’s start with R1.
This is a 120Kohm resistor (4 band colours,
so Brown/Red/Yellow – Gold).
