Rear Panel
1
3
2
1
3
2
AC Power Cord Receptacle:
Insert the AC cord (provided) firmly into the AC connector. NOTE: Replace the AC
power cord if protective jacket is damaged or ground pin is damaged or removed.
NOTE: To prevent an electrical hazard, DO NOT replace fuse without using the
fuse carriage. Replace the fuse carriage if lost or damaged before re-inserting the
AC power cord.
Fuse:
The fuse is located in a housing just below the receptacle. Replace only with the
same fuse type and size. To remove the fuse, remove the AC power cord and pull
out on the tab above the fuse symbol located on the fuse carriage. Place the new
fuse in the carriage clip and re-insert.
Power Switch:
Provides AC power to the amplifier when in the “ON” position.
KA1 Manual_V2.indd 7
1/17/13 11:49 AM
