KAT Percussion KT-M1, Quick Start Manual

Page: 12 / 24

POFF This parameter allows you to change the size of the the hi-hat’s
calibration range: higher values extend the range, while lower
values narrow it down. Bear in mind that changing this setting
also affects the PFACT setting. We recommend editing this
parameter only once you are thoroughly familiar with the system.
6. Another important aspect is the hi-hat channel’s trigger response. This can be
set using the relevant menu items (see the downloadable User Manual for
details).
UNIT-TRIG This is where you set the hi-hat pedal’s response and
sensitivity. Set the main parameters (GAIN, THRES,
CURVE) to match your playing style.
The most important of these is GAIN. Set it so that only the
most forceful strikes produce a Level value of 0.0.
UNIT-HSET This page is used to set the hi-hat pedal’s sensitivity/level
(SENS) and its dynamic response (CURVE).
This completes the hi-hat settings!
6 KAT eHAT 2 Settings
GAIN = 0 PFACT = 60
THRESHOLD = -36 RAW = 847-997
TYPE = ALEHH POFF = 27144
CURVE = NORM
Important: A Mono cable must be used with the eHAT2 with the ALEHH pedal type
setting.
The POFF and RAW number values depend on where the HH CAL screw is set .
The KAT eHAT2 has a very wide dynamic range, and can be successfully
calibrated regardless of the HH CAL screw position. The settings above were
calculated using the default HH CAL screw position.
12
/
24