27
/
88
The lamps must be checked regularly. If there
is any problem with the electrical system, it
must be repaired immediately. In a repair op-
erations, only original and approved sockets or
parts must be used.
If you add or remove any lamps on
the vehicle, your vehicle may be
non-suitable for regulations.
Vehicles with LED electrical sys-
tems consume very low energy.
For this reason, although there is
no problem in the system, it may cause the
failure lamp to come on in old tractors.
Repairing
operations
of
the
electrical system have to be made
by
only
authorized
services.
Otherwise, electrical problems may occur
or your vehicle may be out of warranty.
3.4. King Pin
King pin is a shaft which connects truck and
trailer together. Your vehicle may be equipped
with 2” or 3.5” diameter pins. Please check the
king pin diameter before connecting the truck.
If you match the truck and trailer
with a different diameter king pin,
injuries may occur.
The flanged king pin is used on the vehicle.
That’s why king pin can be replaced easily.
King pin
If the wearing on the king pin is
bigger than 2 mm, the king pin
must be replaced.
Your vehicle may be equipped with a double
king pin slot. You can remove the bolts around
the king pin and mount king pin to the other
slot. Please be careful about the total length of
the vehicle according to country regulations
and be sure that the total length is suitable for
regulations.
3.5. Landing Gear
There is a front landing gears behind the vehi-
cle’s gooseneck area so that your vehicle can
stop in park without towing.
3.5.1.
Front Landing Gear Working
Principle
The landing gear swing arm (1) is removed
from its holder (2) and brought to a perpendic-
ular position to the vehicle.
Summary of Contents for SILO Series
Page 1: ......
Page 89: ...88 88...
