After connecting your drive, double-click its icon
to open it.
Launch the Regen Backup installer by double-
clicking its icon.
Follow the prompts to install Regen and run it
for the first time. If Regen is already installed,
select Start menu > OnSpec Regen > Regen.
Press the backup/copy button on your drive to
start the Button Backup Wizard.
Setup One Button Backup
1
2
3
4
Follow the prompts to specify (1) the backup
drive name, (2) the files or disk you want to
back up, and (3) a name for the backup store.
The backup can be run immediately after setup.
5
Launch the Regen, if it is not already
running (check the System Tray for the
Regen Icon).
Please note that Regen must be running or
launched in order for the One Button feature to
work properly.
Press the Backup/Copy button on your Vault
drive to start the backup immediately.
The backup will proceed without user input or
intervention.
Running One Button Backup
1
2
3
Storage
Vault
©2006 Kaser Corporation. All rights reserved. Other logos, trademarks or registered trademarks are
the property of their respective owners. Visit us at http://www.kasercorp.com for new products.
