Kasei KZ-2700PP-PRO-2S, Operator'S Manual

Page: 24 / 45

Starting method 1:
●
Remove the blade scabbard. Check that the chain is not touching the ground
or any other obstacles.
●
Place the unit on the ground: It must rest securely
on the engine support and the hook. If necessary, rest the hook on a raised
support (e.g. a branch, mound or something.
●
Make sure you have a safe and
secure footing.
●
Hold the unit with your left hand on the fan housing and
press it down firmly – your thumb should be under the fan housing.
Check that nobody is standing within the working range of the pruner.
Do not stand or kneel on the drive tube. This will bend the drive tube and
may result in permanent
Starting method 2:
●
Remove the chain guard. Position the shaft on a branch so that it is held by
the hook.
●
Hold the unit firmly with your left hand on the fan housing – your
thumb should be under the fan housing.
●
Hold the starter grip with your right
hand.
●
Pull the starter grip slowly until you feel it engage and then give it
a brisk strong pull.
●
Do not let the starter grip snap back.Guide it slowly
back into the housing so that the starter rope can rewind properly.
●
Crank the
engine until it begins to fire. After no more than five attempts, turn the choke
knob to .
●
Continue cranking.
Do not pull out the starter rope all the way – it might otherwise break.
-22-