Wireless ADSL Router
USER MANUAL
33
Read Community: This field allows you to specify the SNMP Community string which
provides read-only access to the Router that the community is only permitted to read the
device configuration. The default value is “public”.
Set Community: This field allows you to specify the SNMP Community string which
provides read and write access to the Router that the community has the authority to read
and change the device configuration. The default value is “public”.
System Name: Enter alphanumeric string to specify an SNMP community string name.
Your Router (SNMP agents) will expose management data on the managed systems as
this "system name".
System Location: The person to notify when problems occur.
System contact: The location of the person that is identified as the system contact.
Trap Manager IP: Enter the IP address of the SNMP Manager
，
where the SNMP Agent
forwards trap notifications.
Select the desired values and click Save/Apply to configure the SNMP options.
Appendix: Frequent Asked Questions
Q: None of the LEDs are on when user power on the ADSL router?
A: Please make sure what user use is the power adaptor attached with the ADSL router
package
，
and check the connection between the AC power and ADSL router.