17
WPS function will help you add a new device to the network quickly. If the new device supports
Wi-Fi Protected Setup and is equipped with a configuration button, you can add it to the network
by pressing the configuration button on the device and then press the button on the Router within
two minutes. The status LED on the Router will light blue for five minutes if the device has been
successfully added to the network. If the new device supports Wi-Fi Protected Setup and the
connection way using PIN, you can add it to the network by entering the Router's PIN.
• WPS Status – Enable or disable the WPS function here.
• Push Button – This button's function is same to the physical button on the router.
3.1.4 Administration configuration
Time setting
This page allows you to set the time manually or to configure automatic time
synchronization. The Router can automatically update the time from an NTP server via the
Internet.
