WLAN VDSL Gateway
User Manual
29
Use blocking mode to discard unknown multicast traffic.
Disable / Enable
DHCP server
The DHCP server assigns an IP addresses from a pre-set pool of
addresses upon request from DHCP client (e.g. your computer).
Do not disable the DHCP server unless you wish to let another
device handle IP address issuance on the local network.
Start / end IP
address
This is the beginning and ending range for the DHCP server
addresses.
Leased time
The amount of time before the IP address is refreshed by the
DHCP server.
Configure the
second IP
address and...
Select this option to let the device use a second IP address on
the LAN interface. You can also use this second IP address to
access the device for management. Enter the LAN IP address of
your device in dotted decimal notation, for example, 10.0.0.1.
Type the subnet mask.
Note: If you want to cancel all modification that you do on the Router, please
select from “Management
Setting
Restore Default Settings” to restore
factory default settings.
