WLAN VDSL Router
User Manual
17
PPPoE service name
can be blank unless your Internet Service Provider gives you a
value to enter.
Authentication method
is default to
Auto
. It is recommended that you leave the
Authentication method
in
Auto
, however, you may select
PAP
or
CHAP
if
necessary. The default value for MTU (Maximum Transmission Unit) is
1500
for
PPPoA and
1492
for PPPoE. Do not change these values unless your ISP asks you
to.
Enable Full Cone NAT:
In full cone NAT, all requests from the same private IP
address and port are mapped to the same public source IP address and port.
