ADSL ROUTER
USER MANUAL
12
5.3.2 Remote Access
When the firewall is enabled on a WAN or LAN interface, all incoming IP traffic is
BLOCKED. However, some IP traffic can be
ACCEPTED
by setting up filters.
1. Select Advanced Setup=>Security=>IP Filtering=>Incoming and Choose Add or
Remove to configure incoming IP filters.
2. Click Add to add rules. If you want to do remote ping test, please select protocol
as ICMP; If you want to do Http or Telnet test, please select protocol as TCP/UDP.
If you want only Http remote access, you can set destination port as 80; If you
want only Telnet remote access, you can set destination port as 23; If you want
both, you can set destination port as blank.
3. Click Apply/Save and select Device Info=>WAN. You can see that the IP
address is x.x.x.x.
4. Now you can access the ADSL router remotely using username
support
and
password
support
. You can input
http://x.x.x.x/
for Http and input telnet x.x.x.x for
Telnet.
