LED3S19, LED6S19 WATERGLOW STAINLESS STEEL LIGHTING
MANUAL
884050 / 2021.1.2
4
MOUNTING INSTRUCTIONS
MOUNTING INSTRUCTIONS
1�
Attach the S19 bracket (F) to the light fixture (C) by using two 1/4”-20 x 1/2”’ hex screws (D) on either side in combination with 14”
lock washers (E). 7/16’’ wrench required. Repeat this step for all fixtures.
2�
(Optional) If you want to use one of the color choices instead of the standard soft white light, unpeel the protective lining from both
sides of the colored lens (B) of your choice. Place the lens inside the lens cap (A) making sure the 3 flaps are holding the lens in
place. Repeat this step for all lens caps. Continue to Step 3.
No gap
Flaps behind lens
A
B
Fig. 2
Fig. 3
Fig. 4
Back to Contents
