Kasco Robust-Aire RA1-PM Owner'S Manual Download Page 13

 

                                                                                                                                                                                        

13                                                                                  

 

OWNERS MANUAL 

 

Warranty Claim Procedure: 

The best method for establishing warranty period is by the original receipt. Register your system online at: 

www.kascomarine.com

 

Once the warranty coverage has been established, the unit may be sent to a Kasco Authorized Repair Center 

for evaluation and repair. Please contact Kasco Marine prior to shipping to receive any updated information 

and/or repair form. 

 

Shipping Address: 

Kasco Marine, Inc.  

800 Deere Rd.  

Prescott, WI 54021  

Attn: Repairs 

 

Call or email Kasco Marine to locate your nearest Authorized Repair Center.  

 

715-262-4488 

[email protected]

 

Please include the Repair Form with the shipment. If no Repair Form is available, include: 

Name, Physical address (for return delivery of the repaired unit), Daytime phone number, and E-mail address 

for correspondence regarding the warranty claim. 

 

Expedited shipping

 for the return of the unit is at the customer’s expense. Kasco will return units repaired 

under warranty at our expense via ground freight within the continental United States. 

 

Other Repairs

Failed equipment can be repaired, often at substantially lower costs than replacement. Please ship according to 

above instructions. Contact Kasco for updated information and/or repair form. 

 

Kasco Marine does estimates on repairs at the customer’s request. This request should be included in the 

documentation that accompanies the returned unit and must include a daytime phone number and/or e-mail 

address. We will contact the customer with a total after the unit has been evaluated, but before the work is 

performed.  

 

All estimates that are rejected for repair will be recycled unless otherwise directed by the customer. If the unit is 

to be returned, it will be assembled to the condition in which it was received and shipped at the customer’s 

expense. 

 

 

Billing

All non-warranty repairs will be returned to the customer and billed C.O.D. unless otherwise directed. Kasco 

Marine also accepts Visa and MasterCard upon completion of the repair. 

 

Summary of Contents for Robust-Aire RA1-PM














Reviews: