background image

 

 

 

 

above described test is for checking airflow only and is inappropriate for checking 
the capacity or the running time of batteries. The supplied airflow indicator is to 
be used to check the airflow of the PROF88 and KOMPAT88 PAPRs only. 

 

6 MAINTENANCE

 

6.1 HELMET 

 

Clean shell with organic solvent free detergent or better still with soapy water 

only. 

 

Clean visor with soapy water only. 

 

Wash collar with warm soapy water. 

 

6.2 NiCad BATTERY: 

 

The battery does not require servicing or tipping up. 

 

Store helmet switched OFF and with batteries completely discharged.  

 

After a long storage period repeat the charge-discharge cycle 5 times to bring 

the battery up to its original capacity. 

 
6.3. BATTERY CHARGER: 

 

Store in a dry place. 

 

Avoid excessive impacts or vibrations as these could alter the setting. 

 

 

6.4 FILTERS: 

 

If sealed, the filters remain unaltered until the expiry date shown on them. 

 

Filters cannot be washed, blown out or restored. When exhausted they must 
be disposed of. 

 

Replace both filters simultaneously. 

 

6.5  The  PAPR  is  to  be  serviced  once  a  year  by  KASCO  or  Kasco  authorized 

service centre. 

 

7. CAUTION

 

7.1- Do not use the respirator under the conditions described at paragraph 4.2. 
 

-  Do  not  use  the  respirator  for  any  reason  whatsoever  if  said  does  not 
pressurize. 

7.2- Do not use the respirator if only one fan unit is working. 
 

-  Do  not  use  two  different  types  of  filters.  Both  filters  must  have  the  same 
characteristics. 

 

- Do not use respirator if it does not supply an airflow of at least 170 Lpm. 

 

- Do not immerse helmet in water for cleaning. 

7.3- Do not place battery near or in fire. 
 

- Do not short the terminals. 

 

- Do not leave the helmet ON even if the battery has been discharged. 

7.4-  Do  not  use  battery  chargers  other  than  the  supplied  NC-9  for  recharging 

batteries. 

 

-  Do  not  keep  the  battery  charger  connected  to  the  battery  unless  it  is  also 
connected to the mains and the switch is ON. 

 

-  The  battery  charger  functions  at  its  best  at  average  indoor  temperature 
(b 15° and + 25° C). 

7.5- Do not use expired filters even if their seals are still intact. 
 

- Do not use a filter for more than three months. 

7.6 Return to fresh, clean air immediately and take helmet OFF if: 
 

a) Leakage is detected by smell, taste or eye, nose or throat irritation. 

 

b) Inhaled air becomes extremely hot. 

 

c) Any feeling of nausea, dizziness or ill being develops. 

7.7  THE  HELMET  WILL  NOT  FURNISH  BREATHING  PROTECTION  UNLESS 

THE  FAN  UNITS  WHICH  DRAW  IN  AIR  THROUGH  THE  FILTERS  ARE 
FUNCTIONING PROPERLY. 

7.8 Never alter or modify this respirator in any way. 
7.9 Replace the helmet after harsh impacts even if it does not present any visible 

damage. 

7.10 This equipment is to be used only by qualified personnel trained in 

accordance with a respirator program as outlined in ANSI Z 88.2-1980. 

7.11  Do not use the respirator if your sense of smell is in any way impaired. 
7.12  Do  not  use  the  respirator  if  it  has  not  been  serviced  annually  by  a  Kasco 

authorized service centre. 

 

8. REPAIRS

 

8.1. Use only genuine KASCO spares. 
8.2. For setting and adjustment of electrical parts contact KASCO.  
8.3.  Should  you  require  technical  assistance  for  problems  that  could  arise  while 

using KASCO equipment always include the following information: 

 

a) Type of respirator. 

 

b) Series number. 

 

c) Name of dealer. 

 

d) Problem. 

 

e) Voltage. 

 

f) type of pollution and concentration of same 

 

g) type of filter.  

 

h) amount of hours worked annually - maximum hours worked. 

 

Also include a sketch or drawing of the type of work carried out if you feel it 
might be useful. 

 

9. TRANSPORT 

9.1 The PAPR is to be kept in its original packing during transport. 

 
10. STORAGE 

10.1 Store filter in its original packing at a temperature between 0°C and 40°C and 

a relative humidity lower than 80%. 

 
11. WARNING 

11.1  Review the respirator composition chart / Niosh approval label found inside 
the respirator packaging and ensure that the respirator is composed of the correct 
sub assemblies before use. 
11.2  Kasco retains any type of warranty forfeited on the instant and declines any 
liability  either  direct  or  indirect  should  our  User’s  Instructions  not  be  adhered  to 
and should filters and spares other than genuine Kasco filters and spare be used. 
11.3    The  liability  for  the  proper  operation  of  the  respirator  is  irrevocably 
transferred to the purchaser or operator if:

 

a)  the  prescribed  maintenance  is  not  carried  out  and/or  if  repairs  and 

maintenance are carried out on the respirator by personnel not employed by 
or service centers not authorized by KASCO. 

b)  the  respirator  is  used  in  a  manner  not  conforming  to  its  intended  use  as 

specified in the relative product certification/approval. 

11.4  IMPORTANT: 

Adhere  strictly  to  all  instructions,  labels  and  limitations 

pertaining to this equipment. If instructions and warning are not adhered to at 
all  times,  respirator  effectiveness  will  diminish  and  wearer  protection  will  be 
reduced. 

 

 

 
 
 

LIMITED PRODUCT WARRANTY 

 

KASCO, as manufacturer, warrants to the original purchaser, each product of its own manufacture, for a period of one year from its date of shipment from the factory, to be free from 
defects in material and workmanship under normal use and service. 
Normal use and service is intended as all the operations specified in the applicable instruction manuals. 
This warranty does not apply to any product which has been repaired or altered to adversely affect the performance of reliability of the respirator or other product. 
This warranty does not apply to filters and furthermore does not apply to motors and batteries, the expected life of which is stated in the relative instructions manuals. 
Neither this warranty nor any implied warranty applies to damage or harm caused by any or all of the following: 
1.  Freight damage 
2.  Damage caused by parts and/or accessories or components not obtained from or approved by KASCO. 
3.  Damage due to misapplication and/or misuse. 
The liability of KASCO under the foregoing warranty is limited to the repair or replacement at KASCO’s option without charge for labor or materials of any part upon return of the entire 
respirator or other product or of the particular part to the KASCO factory within the warranty period, at the sole expense of the purchaser, which part shall upon examination appear to the 
satisfaction of KASCO to have been defective in material or workmanship. 
KASCO expressly warrants its products as above stated. Any other intervention on products returned will be charged at the prices in force. 
There are no other express warranties. 
Any implied warranties, including implied warranty of merchantability or of fitness for a particular purpose, are limited in duration to one year from the date of purchase by the first purchaser 
except in States that do not allow time limitations on implied warranties. There is no implied warranty of fitness for a particular purpose or merchantability when this product is put to a rental 
use. 
No  person  including  any  dealer  or  representative  of  KASCO  is  authorized  to  make  any  representation  or  warranty  concerning  KASCO  products  on  behalf  of  KASCO  or  to  assume  for 
KASCO the obligations contained in this warranty. 
KASCO reserves the right to make changes in design and other changes and improvements upon its products without imposing any obligations upon itself to install the same, upon existing 
products or products then in the process of manufacture. 
This  warranty  does  not  cover labor expenses for products returned to KASCO within the warranty period for checks or repairs under warranty if said products are found to be in good 
working order. 
Products returned to KASCO for repairs or replacement shall contain the series or lot number originally affixed to the product at the time of production. 

 
 

 
 
 
 

KASCO SRL - Via Romania, 12 -  42124 Reggio Emilia - Italia  Tel: (0522) 308232 - Fax: (0522) 939803  

e-mail: 

[email protected]

  -  web: [email protected]

 

Reviews: