SM-50 SUSPENDED MOUNT MANUAL
2
IMPORTANT: PLEASE READ THIS MANUAL AND SAVE FOR FUTURE REFERENCE
Moving Machinery
WARNINGS:
Shock Hazard
•
Under NO circumstances should anyone enter the water with the mixer connected or in operation.
•
Running the unit out of water will create a dangerous situation and damage the seals.
•
NEVER lift the unit by the power cord. If you need to remove the mixer, use the installation or mount
apparatus.
•
The unit must be connected to a GFCI-protected circuit.
•
Comply with local and national wiring standards during any electrical service disconnect.
•
Consult a qualified professional for electrical installation.
•
Use all Personal Protective Equipment necessary for safe ingress, installation, and egress from the
work site.
•
Refer to applicable national and local laws and standards to facilitate the safe installation of a
CertiSafe Tank Mixer. These may include but are not limited to OSHA, CCOHS, and other regulations
related to:
•
Working over or near water
•
Fall protection systems
•
Falling object protection systems
•
Electrical standards
•
Illumination
•
Ventilation
•
Installation of CertiSafe™ Tank Mixers requires entry into environments that pose potential hazards,
such as those described in section 1910.146 of OSHA’s Occupational Safety and Health Standards for
Permit-required confined spaces. As such:
•
Observe any applicable pre-entry measures required by the entry supervisor.
•
Only those authorized via the permit system in place at the installation site should participate
in installation.
•
Any authorized entrant should be accompanied by at least one authorized attendant to
monitor conditions inside and outside the permit spaces during installation.
•
Prior to installation, be aware of all potential fall, trip, and atmospheric hazards in the permit
space, both before and after an entrance cover is removed.
SAFETY FIRST
Back to Contents
