
23
HANDELD IRON
recommended to warp the cord safely around the steamer to store in an
upright position.
-
We recommend you store the garment steamer on a flat surface, such as
in a cupboard, until it is time to use it next.
TROUBLESHOOTING GUIDE
Problem
Possible solution
the steamer does not heat up
Check main plug is inserted correctly.
Check power supply.
The steamer does not produce steam
Check the water level and the water tank inlet co-
ver is properly covered.
Press the steam activation button harder.
Hold the steamer in an upright position.
Water spills from the water tank
Make sure water is not over the MAXIMUM level.
Make sure water tank inlet cover is properly clo-
sed.
Always use the steamer in an upright position as
per the operating instructions.
The steamer is producing a loud hum-
ming or pumping sound
Check water level; if there is no water or it is low ,
refill the water tank.
The steamer does not seem to be remo-
ving creases easily
Hold the steamer in an upright position and stretch
the fabric downward to ensure best results.
Unsure when to use the fabric brush
Use when steaming is to directly touch the fabric.
When steaming delicate fabric, such as silk to re-
duce the risk of water dripping onto the garment
while steaming.
Avoiding discolouring of metal accesso-
ries on the garment
Do not directly hover the garment steamer over
the metal accessories.
Use caution and steam around the metal acces-
sories.
Summary of Contents for STIRATORE VERTICALE
Page 13: ...13 STIRATORE VERTICALE NOTE ...
Page 25: ...25 HANDELD IRON NOTES ...