18 MULTIPURPOSE FOOD PROCESSOR
Safety instructions:
1. To achieve the best results when pureeing solid ingredients, place small portions into the jar
one by one instead of placing a large quantity all at once.
2. If you are processing solid ingredients, cut them into small pieces (2-3cm) first.
3. When mixing solid ingredients start off first with a small amount of liquid. Gradually add more
and more liquid through the opening in the lid.
4. Always place your hand on top of the blender when you are operating the device.
5. For stirring solid or very thick liquid ingredients we recommend that you use the blender in
impulse mode to prevent the blades from becoming stuck.
6. NB: Operate the motor for a maximum of 2 minutes to prevent overheating or consequent
damage.
7. It is advisable to wash appliance before using it for the first time.
8. Clean the appliance after each use, thereby avoiding liquid incrustations.
9. The switch does not permanently engage in the ‘P’ setting. You have to hold the switch in the ‘P’
setting
Capability of jar
1500 ml
FOOD PROCESSOR
1. Place the motor section on a flat surface, e.g. a kitchen counter, and make sure it is standing
firmly. Remove the blender protective cover (3) from the swivel arm (see illustration).
2. Remove the food processor bowl cover (19) from the food processor bowl (21) by rotates it
anti-clockwise.
Place the food processor bowl onto the food processor connector (22) ensuring that the arrow
in the bowl is aligned with the arrow on the connector, hold the bowl and turn the connector
clockwise until it locks into position.
3. Place the cutting plate (23 or 24 or 25) onto the connector driver. You choose cutting side must
be uppermost. Handle the cutting plates with care, they are extremely sharp. Hold the plates by
the center grip
Fit the food processor bowl cover onto the bowl, so that the arrow is aligned with the circle. Turn it
