17
ENG
TWIST TWINS
INSTRUCTION MANUAL
ASSEMBLING THE CHARGING BASE:
1- Insert the charge adapter plug through the hole in the underside of the
charging base / wall mounting bracket.
2- Turn the charge adapter plug one quarter turn to secure it into place.
CHARGING BASE / WALL MOUNTING BRACKET:
1- If you wish to mount the charging base onto a wall, make sure that the
intended wall area that is to be drilled is free from any hidden electrical wires,
water pipes and gas lines.
2- Select an appropriate place that is close to an electrical outlet. Do not
mount near direct sunlight, near a heat source or outdoors.
3- Select an appropriate drill type for the material to be drilled.
4- Carefully measure and mark the location of all bracket holes and then drill
holes and screw the charging base / wall mounting bracket onto the wall.
(Screws not included.)
CHARGING YOUR HAND VACUUM:
1- Plug the charger into the wall outlet. Place the unit in the charging base.
The charging indicator light will illuminate to show that the vacuum is being
charged.
2- The charge time is about 6-8 hours.
3- Always unplug the unit when the charge time is complete.
