8
ARTIK
INSTRUCTION MANUAL
PARTS INDENTIFICATION:
1. On/Off sliding switch with 2 (High/Low) speed settings
2. Oscillation knob
3. DC power input socket
4. AA battery compartment tray
5. USB to DC plug power cable
6. Unscrew and tighten the thumb screw in order to tilt and adjust the
angle (Up/Down) of the fan head
OPERATION:
• Power the fan with USB power cable or insert 4 x “AA” alkaline batteries
into the battery compartment area.
• Slide the On/Off switch to set High/Low speed level.
• Lift up the oscillation knob, the fan will stay in the current position. Push
down the oscillation knob, the fan will oscillate again.
• Adjust the thumb screw to adjust fan angle (Up/Down) to your desired
position.
• When finished using, slide the On/Off switch to the “OFF” position.
ATTENTION:
• Do not use other power source other than USB power cable or “AA”
alkaline batteries.
• Disconnect USB power cable when not using the fan.
Laptop Computer Users Note:
When plugged into your laptop USB port, this fan gets its power source
from the computer laptop. To avoid laptop battery drain, plug laptop
computer into a receptacle while using this fan.
BATTERY WARNINGS: (NOT INCLUDED)
• Do not mix old and new batteries.
• Do not mix alkaline, standard (carton-zinc), or rechargeable (nickel
cadmium) batteries.
• Install batteries with the proper polarity (+/-).
• Always remove exhausted batteries from the product to avoid damage
