Kartsana TGX-241 L, Instruction Manual

Page: 20 / 32

OPERATION AND HANDLING OF
TGX-241 M, L & XL STRETCHERS
18
24-04-2019
2.2.12.- Mounting the stretcher on its rail fixation system in the ambulance
KARTSANA recommends using the KARTSANA rails to secure the stretcher to the
ambulance, since these have been specially designed for that purpose.
Guide the stretcher to the ambulance platform and mount its front wheels (the
smaller 10mm diameter wheels), into the the stretcher dock; if the platform has a
KARTSANA rail, place the front wheels just before the rail. Activate the blue
handle to fold the front legs and slide the stretcher into the stretcher dock up to the
rear legs. At this point, activate the Orange handle to allow the rear legs to fold.
After activating the orange handle, part of the weight of the rear end of the
stretcher must be supported , and so it will be necessary to hold it firmly with
both hands.
Once the above process has been executed in full, the stretcher can be inserted
completely into the stretcher dock, until it is locked in place at the front and rear.
The KARTSANA rail fixation system anchors the stretcher at the front by means of
two anchoring points at the front and one anchoring point at the rear (see the
figures below). These anchoring points prevent the stretcher from overturning in the
event of an accident. In the event of not using the KARTSANA rails, it is advisable
that the front part of the stretcher cart be anchored at the end of the bar marked 12
in the exploded diagram of the cart that is included in this manual.
.
Punto de
anclaje 3
Punto de
anclaje 1
Punto de
anclaje
2
RAIL R-450 S INOX
RAIL R-419