Kartsana BRAVO 2, Instruction Manual

Page: 11 / 28

OPERATION AND USAGE
OF BRAVO 2 RAIL
10
Rev. 9
20-02-18
2.2.2.- Unloading lever.
Push down the unloading lever “C” located between the guides at the front of the
rail as shown in the figure below. While maintaining the lever in this position, pull
the stretcher towards the outside of the ambulance until the mechanical limit has
been reached. Once the rail is fully extended we will be able to open out the
stretcher legs by pressing the arrow. Once the electric stretcher has been
raised above the rail level we can withdraw it.
To prevent injuries to limbs and other body parts, make sure they are not within
the range of the rail moveable parts.
Note: The rear part of the rail corresponds to the part where the rail start lever is
located.
IMPORTANT:
C