Kartina LIKE TV-203W, User Manual

Page: 13 / 23

Ethernet Network Setup (LAN)
Follow these steps to automatically set up a wired network connection:
1. Plug an Ethernet cable into the Ethernet connector on the media player. Plug the opposite
end of the Ethernet cable directly into a LAN port on a router or network switch.
2. Turn on the router, if it was turned off, and wait for a full load (1-3 min).
3. Connect the power cable to the player and switch the player on using the power switch on
the back panel of the player. It takes around 1minute for the player to boot up completely.
The media player is instructed to automatically receive an IP address and other parameters
required for TCP/IP network. Adjust the Kartina TV settings as needed using
“Kartina. TV”
menu. Use RC remote control to input the “ Subscription ” and “ Password ” manually.
www.kartina.tv
13