4. use of products
4-1. Automatic feeder
1) Power On/Off
- When you are trying to switch to the On the power, press and hold the ON /
OFF button. Beep sounds and the system is enabled. The current time is displayed
on the LCD, Power LED will light green. (I can be operated in the same way also
is OFF.)
2) Current Time
- Press the "Timing setting" button, set the hours and minutes are possible.
- Part of the "time" will flash when you press once, at this time, "+, -" setting of
time is possible by using the button.
- Part of the "minutes" will flash when pressed a second time, "+, -" in the same
way as the minutes setting is possible using the button.
<Note: setting is relative to the 24-hour system. >
