16
Installation instruction
Safety Belt Installation
Caution
The safety belt is used to fix user’s body and prevent the user f r o m sliding from the seat. But it
can’t protect you in the accident.
The safety belt can be adjusted according to the user’s need.
The safety belt is used to support the user and to prevent the user from sliding forward.
Installation of the safety belt:
1. The user needs to ensure that the safety belt had bound the waist and the bottom part of
wheelchair backrest together.
2. Adjust the safety belt according to the user’s comfort.
After sitting down, please insert the plastic card to the other side of the plastic shell, until you
hear a clicking sound.
Adjust the plastic safety belt to the appropriate length, do not over tighten, which will cause
discomfort.
Unfasten the safety belt:
Press the button of the plastic shell aside, pull out the plastic card.
Caution
Before each use, ensure that the safety belt is fixed in the electric wheelchair correctly and
properly, and adjust to the most comfortable state of the user.
Before each use, check whether the safety belt is loose or damaged. If you find there is a
problem, Please contact supplier to maintain and repair.
Joystick Installation Instruction
The control panel can be installed on the left or the right arm as requested.
D1
D2
1. As shown in figure D1, insert the joystick i n to the armrest tube hole, and make sure it has been
