3
6
Precauzioni ed avvertenze
1. Evitate di aprire l’apparecchio senza le
precauzioni necessarie per evitare
scosse elettriche. Le riparazioni vanno
effettuate a cura di personale esperto.
2. Evitate di esporre l’apparecchio a fonte di
eccessivo calore, quali stufe, termosifoni
etc. o a raggi diretti del sole per tempi
prolungati. Se lasciate l’apparecchio
inattivo per lungo tempo sarà opportuno
scollegarlo dalla rete elettrica.
3. Trattate i comandi dell’apparecchio con
la dovuta delicatezza, evitando manovre
violente, cadute o colpi.
4. Moderate il volume della voce e la
regolazione dei volumi generali(2), livelli
eccessivi causerebbero deistorsione
nella riproduzione. Riferitevi all'indicatore
a led(10) evitando il livllo di zona rossa.
polarities and re-screw the handle of the
wirelessmicrophone. Be sure of the working
moving the switch on “ON”. Will note lighting up
for a while the (7) light to state you that the
wirelessmicrophone is working. The ceaseless
lighting up of the (7) light states you that the battery
is flat and must be repleaced. Please replace
the battery when you will note a lighting led (7)
during the operation.
6.Insert the small cable with the jack into the
“OUTPUT”(5/6) sockets. The other cable-end
must be connected to the input of your audio
apparatus (amplifier, mixer etc.), if necessary use
an adaptor. If you use the "MIXED" socket you
can trasfer to your amplifier all signals.
Operating instructions
1. Power-on: once completed the connection
between the receiver and your audio
apparatus, act on “POWER”(1) switch, the led
(1-12) will light up. Put on “ON” commutators
(19) of microphone. Attention: the microphone
switch has three steps: off/stand by/on. When it
is on “Stand by” position it will be connected
but no audio signal will be sent to the receiver.
So be sure taht the microphone switch makes
two snaps.
2. Volume adjustment: act on volume controls
(2) to adjust up to the wished level, to obtain
the best results without any distorsion or
ground noise act on controls of the apparatus
connected to the set.
Attention: the “SQUELCH” function can be
adjusted by acting using the rotator comand
(8). This function is used to optimize the
performance by balancing sound quality/clarity
with overall system range.This adjustment will
guarantee a clear, uninterrupted signal but will
reduce overall system range
