
18
CAUTION
●Do not put fingers or clothes under the seat or backrest while seat
functions are operated.
●Do not move the wheelchair while the seat tilted or reclining functions
are operated over the 110 degree.
5.1.12 Manual Reclining Operation (KP-45.6T)
5.1.12.1. Adjust the backrest angle by lifting up the reclining lever on the
seat side. And release the lever when you have set the angle.
5.1.11.2. Tilt the seat back to the normal position before reclining the
backrest.
CAUTION
●
For the models of this wheelchair that has the function of manual
reclining. Note that the gas strut is filled with high pressure gas. Avoid
the things as follows:
-
Do not operate it when the ambient temperature is higher than 60℃
or in the fire.
-
Do not tow the wheelchair at the gas strut.
-
Do not hit the gas strut by other object.
SUGGESTION
●
It is recommended to lubricate tilt and recline actuator every one or 2
months periodically.
SUGGESTION
●
Tilt the chair back to its balance point before you manually adjust the
backrest.
●
It is recommended that you charge the batteries immediately when the
battery indicator shows only three or less red lines.
●
After charging or replacing new batteries, drive the wheelchair for 2-3
minutes to make sure the batteries are fully charged before going on a
long journey.
●
In wintertime, the batteries may respond slowly and the drive range may
also be reduced. You must store your wheelchair indoors above freezing
temperatures.
Summary of Contents for Saber GT Series
