Ulteriori informazioni su:
www.karmaitaliana.it
7
6
Instructions
1.
To turn on the amplifier use the ON/OFF button. The front POWER
led (10) will light on to indicate that the device is on.
2.
If you use the amplifier in bridge the BR front led (11) will light on.
Otherwise, with a stereo use, the PAR led (9) will be enabled.
3.
Check, through the led Vu meters (6), that the amplified signal is
not too high. In this case the CLIP leds (5) will light on. Act on the
volume controls (3) on the right and left channels and reduce it.
4. In case of overloading a safety switch could spring to protect the
amplifier. The PROT(4) leds will light on. If this happens, switch off
the amplifier through the button (7) and use the button (12) to re-
enable the amplifier.