Karma Morgan M MGNM-SLN, User Manual

Page: 61 / 128

54
12.5 Jack sockets
12.5.1 External profile switch jack
This allows the user to select Profiles using an external device, such as a
buddy button. To change the Profile whilst driving simply press the button.
If the control system is set to latched drive or actuator control operation, then
the polarity of the jack input is reversed to affect a fail-safe system; meaning
this input will provide an External Profile Switch function and an Emergency
Stop Switch function.
12.5.2 External on/off switch jack
This allows the user to turn the control system on and off using an external
device, such as a buddy button.
\
12.6 R-net Connectors
To connect the Communication Cables:
• Holding the connector housing, firmly push the connector into its mate until
you can no longer see the yellow plastic.
The connectors are secured using a friction system.
To disconnect the Communication Cables:
• Holding the connector housing firmly, pull the connectors apart.
The Joystick Module is supplied with rubber bungs that must be inserted
into the Jack Socket when no external device is connected.