Karma LED PAR120Q, Instruction Manual, Page: 13 / 16

13
CHART 1 (FUNCTIONS FROM DISPLAY)
DISPLAY FUNCTION
d001 DMX channel (001-512)
AU00 / SO00 10 auto modes + 2 sound activated modes
ST00 Strobe function (16 modes)
SN00 Fading colors (16 combinations)
SP00 Selected effects speed (16 speeds)
R255 Red color intensity (from 000 to 255)
G255 Green color intensity (from 000 to 255)
B255 Blue color intensity (from 000 to 255)
W255 White color intensity (from 000 to 255)
1) MOUNT BRACKET
Used to place the par light on a flat surface or hang
it on stands. Loosen the knobs (3), adjust properly
the bracket and tighten again the knobs (3).
2) RGBW LEDS
When the fixture is on they produce the light
beams. Take care not to cover them during
installation.
3) KNOBS
Tighten them to fix the bracket in the desired
position.
4) DISPLAY
It shows main information and settings selected
by means of the buttons (A- D). For the functions
selectable from the display refer to the chart 1
on this page.
5) DMX IN SOCKET
Connect here the 3 pin DMX cable coming from
a DMX controller or from another fixture
connected to a DMX system.
6) DMX OUT SOCKET
Use this socket to connect another fixture to the
DMX system.
7) POWER IN
Connect here the power cord, which is to be
connected on the other side to a 110/230V
power outlet.
8) POWER OUT
It is possible to connect here a cable that will
carry power to the next fixture.
9) FUSE HOLDER
If the fixture doesn’t turn on disconnect the
power cord from the socket (7), then pull out
the protection fuse from the small housing.
If necessary replace the fuse with one of the
same amperage.
10) COOLING FAN
Do not cover these openings, necessary for the
internal ventilation of the fixture.
A) MENU BUTTON
Useful to select the settings to be changed.
Press it repeatedly to skip from a function to
another. Once completed the changes press the
ENTER (D) button to exit.
Refer to the charts 1 and 2.
B) UP BUTTON
When pressed it increases the value shown on
the display.
C) DOWN BUTTON
When pressed it decreases the value shown on
the display.
D) ENTER BUTTON
Enter button. It confirms the selection made with
the buttons UP/DOWN (B-C).