38
Figure 7.2
7.9 Adjusting the Seat Height
7.9.1 The seat post rests on a seat height adjustment bolt that runs through the
center of the frame post. There are three holes in the frame post that allow
you to adjust the seat height to 17.5"(445 mm), 18.5"(470 mm) or 19.5"(495
mm).
7.9.2 To adjust the seat height, remove the seat by following the previous
instructions. Then remove the rear casing.
7.9.3 Next, remove both bolts from the frame post. (You might want to disconnect
the batteries to allow more room to work). Slide the upper frame post up or
down to the desired position. Then place the seat height adjustment bolt in
the second lowest hole and tighten it. Place the stability bolt in the lowest
hole.
7.9.4
Now you can replace
the rear casing and
install the seat
following the previous
instructions.
Summary of Contents for KS-343.2
Page 1: ...User manual KS 343 2...