18
4.19 Safety Belt (Option)
4.19.1 Please follow the instruction to use the safety belt for your safety.
4.19.2 Please follow the instruction to assemble or disassemble the safety belt.
4.19.3 Put both ends of the safety belt straight through the backrest holder and
insert it through the buckle to adjust to the desired length. (Figure 4.44)
4.19.4 The most comfortable way of using the safety belt is to keep it as 45
degrees. (Figure 4.46)
Figure 4-44
Figure 4-45
Figure 4-46
4.19.5 Please follow the instruction to adjust the safety belt.
4.19.6 Make sure that the total length of the safety belt is sufficient.
4.19.7 Adjust the length of the safety belt through the buckle of both ends. (Figure
4.47)
4.19.8 Pull the two parts of belt tight. (Figure 4.48)
4.19.9 Push the buckle of both ends to the plastic clip so that the safety belt will
not slip out of the position. (Figure 4.49)
Figure 4.47
Figure 4.48
Figure 4.49
SUGGESTION:
●
Please kindly be advised that the safety belt should be fitted tightly around
the pelvis and be tightened until you can just get one finger through
between the safety belt and the user. Kindly check the safety belt position is
fitted to the place as we recommend. If it is not able to be this way, please
consult your supplier.
Summary of Contents for KM-9000
Page 1: ...Manual Wheelchair Owner s Manual Ergo Live Series KM 9000...
Page 2: ......
Page 43: ......
Page 44: ...104 40151 Rev 01 MAY 2013...