background image

 

ii 

●  DO NOT do "wheelies",  since you might fall or tip over backwards and suffer a 

severe injury. 

●  DO NOT sit in the wheelchair within a moving vehicle unless it has been  affixed the 

labels of hook mark. 

●  DO NOT go too fast or turn too quickly. 
●  DO NOT stand on the footplates  when getting in or out of the  wheelchair. 
●  DO NOT go down steps forward, whether solo or with an attendant. 
●  DO NOT attempt  to lift the wheelchair by any removable (detachable)  parts.   

Lifting by means of any removable (detachable)  parts of the wheelchair may result 
in injury to the user and/or assistant or damage to the wheelchair. 

●  Do NOT use the wheelchair when the back is folded. This alters the centre of 

gravity and may cause the wheelchair to tip backwards. The back should only be 
folded for storage or transport  of the wheelchair. 

●  DO NOT hang anything on the back joint that could cause the backrest  to fold 

suddenly and may cause injury. 

 

YOU AND YOUR KARMA SERVICE PROVIDER 

●  No tools are required for assembly. Your wheelchair should be assembled by your 

authorized KARMA dealer. Your authorized KARMA dealer is also your service 
provider. Unauthorized repairs, upgrades and add-ons will void your warranty. 
Anything wheelchair related that requires tools should be done by your authorized 
KARMA service provider. Your KARMA service provider has the necessary 
service/maintenance  manual for your wheelchair. 

●  If you have any defective parts or lose any parts, please contact  your dealer for 

repair and/or replacement.  Please only use parts authorized by KARMA. Use of 
parts that are not authorized by KARMA will void your warranty. 

●  Part numbers are listed on our bill of materials (explosion  drawings), which we give 

to our authorized dealers and service providers. Customers should order parts 
through their dealer as well as all repairs and scheduled maintenance. 

●  Customers should go to their dealership for all service needs to guarantee their 

warranty is not void. Always go to an authorized service provider. Unauthorized 
repairs will void your warranty. Procedures other than those described in this 
manual must be performed by a qualified technician.  They also have the service 
manual with a complete  list of maintenance  required to keep your KARMA 

Summary of Contents for KM-8000 Series

















































Reviews: