Karma KM-5000 recliner Series, Owner'S Manual, Page: 18 / 36

Figure 4.25 Figure 4.26
4.1.3.5 Important Do’s and Don’ts
¾
Do: Keep axles clean and lubricated with light oil or maintenance spray.
¾
Do: Maintain correct tire pressure if using pneumatic tyres(tires).
¾
Do not: Try to remove the wheels while the wheelchair is occupied even when
using anti-tip levers.
4.1.3.6 Safety Belt
How to assemble and disassemble the Safety Belt
¾
Loosen the fourth and fifth screws of both side of seat upholstery and insert the
Safety Belt in between the fourth and fifth screw holes. (Figure 4.27)
¾
Keep the safety Belt in 45 deg for comfortable usage. (Figure 4.28)
¾
Put the seat upholstery back and tighten screws.
Figure 4.27 Figure 4.28
Adjusting length of seat belt
¾
Identify the require length of the belt. (Figure 4.29)
¾
Push the two part of belt through buckle to make the belt longer or shorter.
(Figure 4.30)
¾
Pull the two part of belt tight. (Figure 4.31)
¾
Push buckle up to the plastic clip so that the belt can not slip out of position.
12