29
4.23.1.2 A four point tie-down system should tightly fasten the
lower wheelchair frame to the transport vehicle. The
Tie-down Label (see the hook mark at the right) indicates
the position of the fixing points for the tie down restraints on the
wheelchair.
4.23.1.3 An occupant restraint system using both a pelvis and harness must
also be fastened to the transport vehicle to insure user safety. Again,
please refer to the restraint system's instructions.
4.23.1.4 The attendant / transporter must double-check all fastening points
for proper connection and tightness to assure the wheelchair user's
safety. The attendant / transporter must fully understand the
fastening system's usage and its weight limitations.
4.23.1.5 See http://www.unwin-safety.com/ for more information.
CAUTION:
●
When transporting or lifting, never hold on to attachments or accessories
(front/rear wheels, handrims, casters, footrests, armrests, anti-tippers
etc.).
●
All lifting should be done with a straight back. Straight legs to lift the
wheelchair. Carefully carry it up or down steps; be aware of how you place
your feet, do not cross them and trip yourself up.
4.23.2 Method of Restraint
The Flexx Tall (KM-8022 TL/ KM8522 TL ) was tested with four point webbing
systems. Please refer to the restraint manufacturer's user guide for further
details of its operation.
4.23.3 Fitting the Front Restraint
4.23.1 Connect the straps around the wheelchair frame and caster bracket
as pictured below. The anchor point is marked with a yellow sticker.
